TEK208 Polaris Pro Door Opener

Installation

This installation will cover how to install a TEK208 Polaris Pro Door Opener

Installation Time: 30 Minutes
4 Installation Steps
Difficulty: Easy

Tools

  • #30 Torx Bit
  • #25 Torx Bit

Parts

Step 1
  • Remove two hinge bolts and install hinge bracket using existing bolts. Use plastic spacer so link sets flat. (Not required on all models). To maintain door alignment leave door shut and while installing this piece

Step 2
  • Remove two door bolts where door bracket is shown installed. Using 6 mm x 30mm bolts supplied with kit install door bracket.

Step 3
  • Remove with clips from gas strut ends. Then install gas strut as shown with rod on door side. Replace wire clips on rod ends.

Step 4
  • Test that door swings and shuts properly.