• Install bracket on body at hinge point. Leave door closed to hold door in place and maintain alignment.
• Using 13 mm socket remove 2 bolts holding top hinge bracket in place. Place Tek208 door opener bracket on top of hinge bracket as shown and reinstall bolts and re-tighten.

Note: Minor plastic trimming required on 2019 and later models. Bracket fits under trim piece on newer models.

• Open door and remove screw holding door panel to door frame using #30 torx bit.

• Install Tek208 door opener door bracket to door with supplied 6 mm -1 x 30 mm screws. Install first screw in hole at longer end of bracket and mount in place of screw removed in step #2.